Promise Technology Network Device EX4650 User Manual page 222

SuperTrak EX Series User Manual
temppollint=Drive temperature polling interval in seconds. If value is 0,
15..255
mediumerrorthreshold=
0..4294967294
The following settings are only for SATA drives:
dmamode=
udma0
udma1
udma2
udma3
udma4
udma5
mdma0
mdma1
mdma2
speed=
1.5gb
3gb
auto
The following settings are only for SAS drives:
readcache=
enable
disable
-v
Examples
phydrv
phydrv -v
polling is disabled. For subsystems with dual controllers.
Medium error threshold. If the threshold is reached, the
physical drive is marked as dead. The default value is 0,
indicating that physical drive is not marked as dead for
medium errors. For subsystems with dual controllers.
For SATA drive only. Attempt to negotiate at the specified
DMA transfer mode. If a DMA transer mode cannot be
negotiate, the next slower mode is attempted until a
mode can be negotiated (udma5, udma4....udma0,
mdma 2.....mdma0).
Ultra DMA Mode 0
Ultra DMA Mode 1
Ultra DMA Mode 2
Ultra DMA Mode 3
Ultra DMA Mode 4
Ultra DMA Mode 5
Multi DMA Mode 0
Multi DMA Mode 1
Multi DMA Mode 2
Set the speed of physical drive(s).
1.5 GB/s
3 GB/s
Automatic
Applied to SAS drive only. Enables or disables read
cache on the physical drive(s).
Verbose mode. Used with -a list.
208