Table of Contents
Advertisement
When the buzzer sounds, take the following actions:
•
Check your disk arrays and logical drives.
•
Check the Event Log. See page 101.
To silence the buzzer for the current trigger event, you must disable it.
Also see "Chapter 8: Troubleshooting" on page 257.
Enabling or Disabling the Buzzer
To enable or disable the Buzzer:
1.
In the Main Menu, highlight Miscellaneous and press Enter.
2.
Highlight Buzzer and press Enter.
3.
Highlight your choice and press Enter.
•
Enable
•
Disable
Chapter 4: SuperBuild™ Utility
105
Advertisement
Table of Contents
Need help?
Do you have a question about the Network Device EX4650 and is the answer not in the manual?