Clearing Stale And Pfa Conditions - Promise Technology Network Device EX4650 User Manual

2. Click the Enclosures
3. Click the Enclosure
4. Click the Physical Drives
5. Click a Physical Drive
6. Click the Settings tab in Management View.
7. Type an alias into the Physical Drive Alias field.
Maximum of 32 characters. Use letters, numbers, one space between
words, and underscore.
8. Click the Submit button.

Clearing Stale and PFA Conditions

The Clear tab only appears when one or both conditions are present.
• Stale – The physical drive contains obsolete disk array information.
• PFA – The physical drive has errors resulting in a prediction of failure.
Be sure you have corrected the condition by a physical drive replacement, rebuild
operation, etc., first. Then clear the condition.
To clear a Stale or PFA status from a physical drive:
1. Click the Subsystem
2. Click the Enclosures
3. Click the Enclosure
4. Click the Physical Drives
5. Click a Physical Drive
6. in Management View, click the Clear tab.
7. Click the Submit button.
icon.
icon.
icon.
icon in Tree View.
icon.
icon.
icon.
If a physical drive has both a Stale and a PFA condition, click the
Submit button once to clear the Stale condition, then click again
to clear the PFA condition.
Chapter 5: Management with WebPAM PRO
icon.
icon.
Note
149