Promise Technology Network Device EX4650 User Manual page 213

event -a clear [-l <location>]
Summary
The event command displays and clears the RAM and NVRAM event logs.
Options
-a <action>
list
clear
-l <location>
ram
nvram
-i <sequence ID>
-c <event count>
-v
Examples
event
event -v
event -l nvram
event -a clear -lnvram
event -c 200
event -a list -i852 -c200
export
Usage
export -t <fileType> [-s <tftpServer>] [-p <port>] -f <fileName>
Summary
The export command exports certain types of configuration files to a remote or
local host.
This command only affects subsystems.
Specified the action to perform.
Displays the events for the specified location.
RAM events are displayed if no location is specified.
Clear events for a specified location.
Specifies the location from which to display or clear
events.
All events are stored in RAM.
These events are lost after rebooting.
Some events are also stored in NVRAM.
These events remain after rebooting and are a subset of
the RAM events.
Specifies a specific event by its sequence number. This
is a starting point. Requires the -a list option. You can
use the -c option.
Specifies the number of events to retrieve when
displaying events.
Verbose mode. Requires the -a list option.
199
Chapter 6: Management with the CLI