Selecting A Controller - Promise Technology Network Device EX4650 User Manual

• Miscellaneous – SAS drive LEDs, enclosure management, and buzzer
settings

Selecting a Controller

The SuperBuild Configuration utility supports up to two SuperTrak RAID
Controller cards installed in the same Host PC. Controller selection enables you
to select which of the two SuperTrak controllers the utility accesses.
If you have only one SuperTrak card installed in the Host PC, the SuperTrak is
Controller 1, and no selection is necessary.
If you have two SuperTrak cards installed in the Host PC, take the following
action to select one of them:
1. In the Main Menu, highlight Controller Selection and press Enter.
2. Highlight Controller 1 or Controller 2 and press Enter.
The selected controller (SuperTrak card) displays in the SuperBuild utility.
Chapter 4: SuperBuild™ Utility
85