Setting Up Extended Smtp; Sending A Test Email Message; Setting Event Frame Refresh Time - Promise Technology Network Device EX4650 User Manual

Setting up Extended SMTP

To make Extended SMTP settings:
1. Click the Administrative Tools
2. Click the Software Management
3. Click the Email tab in Management View.
4. Check the Enable ESMTP box to enable ESMTP.
Uncheck the box to disable ESMTP.
5. Enter ESMTP user name in the field provided.
6. Enter a ESMTP password in the field provided.
7. When you are done, click the Submit button.

Sending A Test Email Message

Before you can send a test message, your email service must be set up as
described in "Setting up Email Service" on page 124.
To send a test email message:
1. Click the Administrative Tools
2. Click the Software Management
3. Click the Email tab in Management View.
4. Click the Test Email button.
A new window opens.
5. Type the recipient's email address in the field provided.
6. Click the Submit button.
WebPAM PRO sends a test email message to the address you specified.

Setting Event Frame Refresh Time

To set the refresh time for the Event Frame:
1. Click the Administrative Tools
2. Click the Software Management
3. Click the Refresh time tab.
4. Choose a time interval from the Event Refresh Time dropdown menu.
The choices are 15, 30, 60, and 300 seconds.
5. Click the Submit button.
Chapter 5: Management with WebPAM PRO
icon in Tree View.
icon.
icon in Tree View.
icon.
icon in Tree View.
icon.
125