Promise Technology Network Device EX4650 User Manual page 215

iscsi
netiscsi
netmgmt
phydrv
sas
scsi
subsys
Following are individual Software settings, which only apply to Subsystems:
bgascheduler
service
webserver
snmp
telnet
email
netsend
cim
user
Examples
factorydefaults -a restore -t phydrv
factorydefaults -a restore -t all
init
Usage
init [-a <action>] [-l <LdId>]
init -a start -l <LdId> [-q <size>] [-p <pattern>]
init -a stop -l <LdId>
init -a pause -l <LdId>
init -a resume -l <LdId>
Summary
The init command starts, stops, pauses, and resumes a logical drive initialization.
A full initialization writes to the entire logical drive space and takes several
minutes, depending on the size of the logical drive.
Subsystems only. iscsi settings, including node, port,
SLP, and iSNS.
Subsystems only. Network settings of iSCSI ports.
Subsystems only. Network settings of management
ports.
Physical drive settings.
Subsystems only. SAS host interface port setting.
Subsystems only. Parallel SCSI channel settings.
Subsystem settings.
Background activity scheduler settings.
Service startup type settings.
Web server settings.
SNMP settings.
Telnet settings.
Email settings.
Netsend settings.
CIM settings.
User settings.
201
Chapter 6: Management with the CLI