Promise Technology Network Device EX4650 User Manual page 224

SuperTrak EX Series User Manual
-p <port number>
Examples
ptiflash -f fw_multi_20051022.img[for SuperTrak controllers]
ptiflash -t -s 192.168.1.1 -f fw_multi_20031010.img -p 69[for embedded
Subsystems]
ptiflash -f fw_multi_20031010.img[for in-band Subsystems]
rc
Usage
rc [-a <action>] [-l <LdId>]
rc -a start -l <LdId> [-n] [-p]
rc -a stop -l <LdId>
rc -a pause -l <LdId>
rc -a resume -l <LdId>
Summary
Th rc command starts, stops, pauses and resumes a Redundancy Check and
monitors the progress of a running Redundancy Check.
Options
-a <action>
list
start
stop
pause
resume
-l <Ld ID>
-n
-p
Subsystems only. Specifies the port number of the TFTP
server.
If no port number is given, the default value of 69 is used.
Specifies action to perform.
(Default) Displays active and paused Redundancy
Checks and their status.
Starts a Redundancy Check.
Stops a Redundancy Check.
Pauses a Redundancy Check.
Resumes a paused Redundancy Check.
Specifies the logical drive ID on which to run the
Redundancy Check.
Do not fix inconsistent data. This option causes
Redundancy Check to run without correcting inconsistent
data. All inconsistency errors are reported.
Pause on error. This option causes Redundancy Check
to pause when it encounters inconsistent data. The
default is to continue on error.
210