Promise Technology Network Device EX4650 User Manual page 202

SuperTrak EX Series User Manual
Examples
array -v -c 1
array -a add -s "alias=MyArray,mediapatrol=enable" -p 1,3,5~9
-l "raid=5,capacity=50gb,stripe=256kb,sector=1kb"
array -a add -p 1,3,5~9 -l "raid=5,capacity=50gb,stripe=256kb"
-l "raid=0,capacity=100gb"
array -a mod -d 1 -s "alias=YourArray,mediapatrol=disable"
array -a del -d 3
array -a locate -d 0
array -a accept -d 2
array -a addld -d 0 -l "raid=1e,capacity=125gb,stripe=64kb"
array -a delld -l 1
battery
Usage
battery [-a <action>] [-b <batId>]
battery -a recondition -b <batId>
Summary
The battery command displays the status of a battery by the percentage of
charge left.
On subsystems, this command also reconditions the battery. Reconditioning fully
discharges then fully recharge the battery. The battery is reconditioned
automatically once per month.
Options
-a <action>
list
recondition
-b <battery ID>
1..2
Examples
battery
battery -a recondition -b 1
Specifies the action to perform.
(Default) List information for all batteries or a specific
battery.
Subsystems only. Recondition a specific battery.
Specifies which battery in a given enclosure.
188