Clearing An Orphan Watermark; Viewing Battery Information - Promise Technology Network Device EX4650 User Manual

SuperTrak EX Series User Manual
• Choose a coercion method from the Coercion Method dropdown menu.
The choices are:
•
•
•
•
For more information, see "Capacity Coercion" on page 238.
• Enter a time interval (1 to 12 seconds) in the Write Back Cache Flush
Interval field.
For more information, see "Choosing Cache Policy" on page 237.
• Enter a time interval (15 to 255 seconds) in the Enclosure Polling
Interval field.
This is the time interval in which the controller polls all of the
components in the enclosure.
Note: Adaptive Writeback Cache is a planned feature for SuperTrak.
6. Click the Submit button.
The changes take effect immediately.

Clearing an Orphan Watermark

An Orphan Watermark condition is the result of a disk drive failure during an
NVRAM RAID level migration on a disk array. The Clear tab remains grayed out
unless this condition is present.
To clear an orphan watermark:
1. Click the Subsystem
2. Click the Controllers
3. Click the Controller
4. Click the Clear tab in Management View.
5. Click the Submit button.
The change takes effect immediately.

Viewing Battery Information

The RAID controller's cache backup battery protects data in the cache for up to
72 hours in the event of a power failure.
To view battery information:
1. Click the Subsystem
2. Click the Controllers
GBTruncate
10GBTruncate
GRPRounding
TableRounding
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
142