Promise Technology Network Device EX4650 User Manual page 214

SuperTrak EX Series User Manual
Options
-t <file type>
userdb
servicereport
-f <file name>
-s <TFTP server>
-p <port num>
Examples
export -t userdb -s 192.168.1.1 -f userdb.bin
export -t servicereport -s 192.168.1.1 -f servicereport # for embedded
export -t servicereport -f servicereport # for in-band
factorydefaults
Usage
factorydefaults -a <action> -t <type>
Summary
The factorydefaults command restores factory default settings.
Options
-a <action>
restore
-t <type>
all
allfw
allsw
Following are individual Firmware settings:
bga
ctrl
encl
fc
Specifies the type of file to export.
User database file. This file type is not applicable for in-
band and can only be exported to a remote host.
System service report file. This file is exported to remote
host for embedded and local host for in-band.
Specifies the name of the file to be exported.
Specifies TFTP server's IP or host name.
Do not specify TFTP server for in-band.
The port number of the TFTP server. Default is 69.
Do not specify port number for in-band.
Specifies the action to perform.
Restore the factory default settings.
Specifies the type of settings to restore.
All settings.
All firmware settings.
Subsystems only. All software settings.
Background activity settings.
Controller settings.
Enclosure settings, including temperature thresholds,
buzzer etc.
Subsystems only. FC port settings.
200