Existing System; Chapter 3: Installing Drivers, Cont - Promise Technology Network Device EX4650 User Manual

5. After those commands finish, type the following command and press Enter.
umount /cdrom
6. Remove the USB device.
7. Press Alt+F1, exit the installation, and reboot your PC.

Existing System

1. Insert the driver diskette or CD, or attach the USB stick.
2. Log in as root.
3. Type mount -r /dev/fd0 /mnt/floppy.
Change this command as needed for a CD or USB stick.
4. Type cd /mnt/floppy
Change this command as needed for a CD or USB stick.
5. Type ./load.
6. Type cd; umount /mnt/floppy.
Change this command as needed for a CD or USB stick.
7. Remove the driver diskette, CD, or USB stick.
8. Type reboot to restart the system.
77
Chapter 3: Installing Drivers