Promise Technology Network Device EX4650 User Manual page 220

SuperTrak EX Series User Manual
Options
-a <action>
list
start
stop
pause
resume
-d <DA ID>
-s <sequence Num>
-p <PD ID>
Examples
pdm
pdm -a start -d0 -s2 -p10
pdm -a stop -d0 -s2
phydrv
Usage
phydrv [-a <action>] [-p <PdId>] [-c <Pd count>] [-v]
phydrv -a mod -p <PdId> -s "<list of settings>"
phydrv -a locate -p <PdId>
phydrv -a online -p <PdId>
phydrv -a offline -p <PdId>
phydrv -a clear -t <condition type> -p <PdId>
Summary
The phydrv command displays physical drive information, changes physical drive
settings, locates individual drives, and forces a drive to an online or offline state.
Options
-a <action>
list
mod
locate
Specifies the action to perform.
(Default) Displays the active and paused PDMs and their
status.
Starts a manual PDM.
Stops a PDM.
Pauses a PDM.
Resumes a paused PDM.
Specifies which disk array on which to perform the PDM.
Specifies the sequence number of the suspect drive.
Specifies physical drive ID of the replacement drive.
Specifies the action to perform.
(Default) Displays all physical drives, their make, model
number, and array they belong to. Their status is also
shown.
Modifiies physical drive settings.
Flashes the physical drive's LED so you can location it.
206