Table of Contents
Advertisement
Existing System
After installing the SuperTrak EX Series RAID Controller card and rebooting your
system, Windows Server 2003 setup will show a "Found New Hardware" dialog
box. Under Windows 2003, "RAID Controller" will be displayed.
1.
Insert the SuperTrak driver diskette into the A:\ drive.
2.
Choose Install the software automatically and press the Enter key.
3.
If using a driver that has not been digitally signed by Microsoft, you will be
asked if you want to continue the installation. Click Continue anyway.
4.
When the New Hardware Wizard has finished installing the SuperTrak driver,
click Finish.
Confirming Driver Installation
1.
Right-click the My Computer icon and choose Manage from the popup
menu.
2.
From the left panel, choose Device Manager.
3.
Click the + in front of SCSI and RAID controllers. "Promise SuperTrak EX
[4650, 8650, 8654, 8658, 16650] (tm) Controller" and "Promise Raid
Console" should appear.
67
Chapter 3: Installing Drivers
Advertisement
Table of Contents
Need help?
Do you have a question about the Network Device EX4650 and is the answer not in the manual?