Promise Technology Network Device EX4650 User Manual page 208

SuperTrak EX Series User Manual
Examples
config -a auto
config -a expr -ry -p y -c n -sy -t data -l2
ctrl
Usage
ctrl [-a <action>] [-i <ctrlId>] [-c <ctrl count>] [-v]
ctrl -a mod [-i <ctrlId>] -s "<list of settings>"
ctrl -a clear [-i <ctrlId>] [-t <condition type>]
Summary
The ctrl command displays controller information and changes controller settings.
Options
-a <action>
list
mod
clear
-i <ctrl ID>
-c <ctrl count>
-s "<option>=<value>" Specifies which settings to change.
alias=
Following setting is shared if there are dual controllers:
coercion=
enable
disable
coercionmethod=
Specifies the action to perform.
(Default) Lists controller information.
Changes controller settings.
Clears controller conditions.
Specifies the controller ID. For subsystems with dual
controllers, controller ID is required when setting alias of
controller.
Controller count. Required for information on multiple
controllers.
A user-specified name for the controller.
Up to 48 characters long, alpha- numeric characters,
blank spaces and underscores. The beginning and
ending blank spaces are discarded.
Enables or disables disk coercion. Disk coercion will
truncate the size of the physical drives. Makes different
size drives appear to be the same size. For example, a
90.1 GB drive would appear as the same size as an 89.8
GB drive. Important when using drives of different
manufacturers for rebuilds or as hot spares.
The method of coercion.
194