Promise Technology Network Device EX4650 User Manual page 200

SuperTrak EX Series User Manual
-p <PD ID list>
-s "<option>=<value> Specifies array settings when creating (add) or modifying
alias=
mediapatrol=
enable
disable
pdm=
enable
disable
-l "<option>=<value>" Specifies logical drive settings when adding a logical
<LD ID list>
ID=
Alias=
Raid=
0
1
5
10
1e
50
6
60
Capacity=
deleting, locating, accepting, adding or deleting a logical
drive. Only one array may be specified.
Specifies physical drives to be used in an array, with -a
add option. PD IDs are specified individually or separated
by comma. Sequential group of physical drives are
specified by placing a ~ between numbers such as 1~6.
This will include physical drives 1, 2, 3, 4, 5, and 6.
(mod) an array. Options are comma separated.
A user-specified array name. Up to 32 characters, alpha-
numeric characters, blank spaces and underscores.
Beginning and ending blank spaces are discarded.
Enables or disables Media Patrol for this array.
The default is enable.
Enables or disables PDM for this array.
The default is enable.
drive to an existing array (addld) or during array creation
(add). Options are comma separated.
Specifies a list of Logical Drive IDs. Requires the -a delld
option.
Assigns a specific ID to an array. Overrides automatic ID
assignment. Valid values are 0-255.
A user-specified name for the logical drive.
Specifies logical drive RAID level.
Striping.
Mirroring on two drives.
Parity, requiring 3 or more drives.
Mirroring on even number of drives.
Extended mirroring, requiring 2 or more drives.
Striping on multiple RAID 5, requiring 6 or more drives.
Allow two drive failure, requiring 4 or more drives.
Striping on multiple RAID 6, requiring 8 or more drives.
Specifies logical drive capacity. Can be specified in
megabytes (mb), gigabytes (gb) or terabytes (tb), up to 2
186