Table Of Supported Commands - Promise Technology Network Device EX4650 User Manual

Table of Supported Commands

Command
about
array
battery
bbm
bga
buzz
checktable
config
ctrl
date
enclosure
event
export
factorydefaults
init
View utility information.
View or edit array information.
Create, edit, or delete a new or existing array.
Create, edit, or delete logical drives in an existing array.
To physically locate an array in an enclosure.
Accept an incomplete array condition.
Subsystems only. View battery information or to
recondition a battery.
View or clear the BBM defect list of the specified
configured physical drive.
View status of all current background activities.
Enable or disable relevant background activities.
Modify the background task rate for each of the
background tasks.
View buzzer status, enable/disable and turn on/off buzzer.
View logical drive error tables.
For express or automatic configuration.
For advanced configuration please see the 'array'
command.
View or edit controller information and settings.
View or edit system time.
View or edit enclosure and SEP information and settings.
Locate an enclosure via LEDs.
View or clear events logs.
Subsystems only. Export files to remote tftp host.
Restore settings to factory defaults.
View logical drive initialization status and progress.
Start, stop, pause, or resume an initialization or a quick
initialization.
181
Chapter 6: Management with the CLI
Action