Promise Technology Network Device EX4650 User Manual page 228

SuperTrak EX Series User Manual
Summary
The spath command discovers and changes subsystem paths.
Options
-a <action>
list
discover
chgpath
-t <type>
hba
subsys
-p <path number>
-c <count>
Examples
spath
spath -a discover
spath -a chgpath -t subsys -p 1
stats
Usage
stats [-t <type>] [-i <devId>] [-c <Count>]
stats -a clear
Summary
The stats command displays statistics of subsytem, controller, enclosure,
physical drives, and logical drives; and resets the statistics count to zero.
Which action to perform.
(Default) Lists the subsystem paths that have been
discovered.
Discovers subsystem paths.
Changes the current subsystem path to the new specified
path.
If -t <type> -p <path #> is not specified, it will list the
current subsystem path.
Specifies the type of path.
HBA.
Subsystem.
With the -a list option, the default is both HBA and
Subsystem.
With the -a chgpath options, you must specify -t and -p to
change the path.
You cannot use the -t option with the -a discover option.
Specifies the path number of the HBA and subsystem.
The path number starts from 1.
Specifies the number of paths to be displayed.
Not currently supported.
214