System Log - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Multi-Function Router
User Manual

System Log

On the System / System log page, you can set the system log options and configure sending the
system log to a remote host.
Figure 123. The System / System log page. The Configuration tab.
To enable logging of the system events, select the Logging checkbox on the Configuration tab.
Then specify the needed parameters.
Control
Logging type
Logging level
Server
Select a type of logging from the drop-down list.
Local: the system log is stored in the router's memory (and
•
displayed on the Log tab). When this value is selected, the
Server and Port fields are not displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Local and remote: the system log is stored in the router's
•
memory (and displayed on the Log tab) and sent to the
remote host specified in the Server field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Page 172 of 233
Configuring Device (Router Mode)
Description