Utilization; Port Utilization - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry based on the information entered/selected.
The fields that can be configured for VLAN Counter Table are described below:
Parameter
Interface VLAN
Traffic Direction
Click the Find button to display entries in the table based on the information entered/selected.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Utilization

Port Utilization

This window is used to display the port utilization table.
To view the following window, click Monitoring > Utilization > Port Utilization, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
Click the Find button to display entries in the table based on the information entered/selected.
Click the Refresh button to refresh the information displayed in the table.
Description
• Both - Specifies to count ingress and egress traffic.
Description
Enter the VLAN ID that will be used in the display here. The range is from 1 to
4094. Select the All option to display counter information associated with all
VLAN interfaces.
Select the traffic direction to display here. Options to choose from are:
• RX - Specifies to display ingress traffic count settings.
• TX - Specifies to display egress traffic count settings.
• Both - Specifies to display ingress and egress traffic count settings.
Figure 11-2 Port Utilization Window
Description
Select the Switch unit that will be used here.
Select the range of ports that will be used here.
398