Port Security; Port Security Settings - D-Link DGS-3200 Series User Manual

Layer 2 gigabit ethernet managed switch
Hide thumbs Also See for DGS-3200 Series:
Table of Contents

Advertisement

Port Security

The Port Security folder contains two windows: Port Security Settings and Port Lock Entries.

Port Security Settings

A given port's (or a range of ports') dynamic MAC address learning can be locked such that the current source MAC addresses
entered into the MAC address forwarding table can not be changed once the port lock is enabled. The port can be locked by
changing the Admin State pull-down menu to Enabled and clicking Apply.
Port Security is a security feature that prevents unauthorized computers (with source MAC addresses) unknown to the Switch
prior to locking the port (or ports) from connecting to the Switch's locked ports and gaining access to the network.
To view the following window, click Security > Port Security > Port Security Settings.
The following parameters can be set:
Parameter
Port Security Trap/
Log Settings
From Port
To Port
Admin State
Max Learning Address
(0-16)
Lock Address Mode
Click Apply to implement changes made.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 9- 7. Port Security Settings window
Description
Use the radio button to enable or disable Port Security Traps and Log Settings on the
Switch.
The beginning port of a consecutive group of ports to be configured.
The ending port of a consecutive group of ports to be configured.
This pull-down menu allows the user to enable or disable Port Security (locked MAC
address table for the selected ports).
The number of MAC addresses that will be in the MAC address forwarding table for the
selected switch and group of ports.
This pull-down menu allows the option of how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will only age out after the Switch has been reset.
DeleteOnTimeout – The locked addresses will age out after the aging timer expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been reset or
rebooted.
119

Advertisement

Table of Contents
loading

Table of Contents