System Settings - D-Link DSL-245GE User Manual

Section 4 - Configuration
This page allows you to save the router's current configuration, load a
previously saved configuration, reset the router to its factory defaults, or
reboot the router. To access this page, go to Management > System Settings.
Device Information
Hardware Version:
Displays the hardware version of the router.
Firmware Version:
Displays the current firmware version.

System Settings

Reboot the Click Reboot to reboot the router.
Device:
Restore to Factory This option will restore all configuration settings back to the settings
Default Settings: that were in effect at the time the router was shipped from the factory.
Any settings after that time will be lost, including any rules that you have
created. You can save the current router configuration settings before
performing factory restoration with the Save Settings to Local Hard
Drive function below.
Save Settings to This option will save the current router configuration settings to a file
Local Hard Drive: (.cfg) on your computer. Click Save to save the configuration file to your
browser's default download directory. This configuration file can be used
to restore your router to a previous state with the Load Settings From
Local Hard Drive below.
Load Settings This option will load a previously saved router configuration file. This will
overwrite the router's current configuration. Click Select File to locate the
From Local Hard
Drive: configuration file from your local directory, then click Upload Settings
to start uploading the configurations.
Note: The router will reboot during the restoration process. Do not turn
the power on or off.
D-Link DSL-245GE User Manual
System Settings
83