Igmp Snooping Rate Limit Settings; Igmp Snooping Static Group Settings - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

IGMP Snooping Rate Limit Settings

This table allows the user to configure the rate of IGMP snooping control packets that are allowed per port or VLAN.
To view this window, click L2 Features > IGMP Snooping > IGMP Snooping Rate Limit Settings as shown below:
The following parameters can be configured:
Parameter Description
Port List
Specifies a port or range of ports that will be configured.
VLAN List
Specifies a VLAN or range of VLANs that will be configured.
Rate Limit (1-1000)
Configures the rate of IGMP control packets that are allowed per port or VLAN.
Click Apply to implement changes made.

IGMP Snooping Static Group Settings

This table is used to configure the current IGMP snooping static group information on the Switch.
To view this window, click L2 Features > IGMP Snooping > IGMP Snooping Static Group Settings as shown below:
The following parameters can be configured:
Parameter Description
VLAN Name The name of the VLAN for which to create IGMP snooping static group information.
VLAN List
The list of the VLAN IDs for which to create IGMP snooping static group information.
IPv4 Address The static group address for which to create IGMP snooping static group information.
Click Apply to implement changes made. To search for an entry enter the appropriate information and click Find, to
remove and entry enter the appropriate information and click Delete.
Figure 3 - 31 IGMP Snooping Rate Limit Settings window
Figure 3 - 32 IGMP Snooping Static Group Settings window
94