Front, Top And Side Panels; D About The Status Indicator; D About The Multi-Connector; D About The Software Key Functions - Icom IC-F62D Operating Manual

2
PANEL DESCRIPTION

Front, top and side panels

[Rotary Encoder]
Antenna
Connector
[Emer]
[PTT]
[OK]
[F1]
[F2]
Microphone

D About the Status indicator

• Lights white, then blinks red, yellow, and green when
turning ON the transceiver�
• Lights red while transmitting�
• Lights green while receiving a signal, or when the
squelch is open�
[VOL]
Status

D About the Multi-connector

indicator
Connects to an optional speaker microphone or
headset�
Multi-
connector
CAUTION: DO NOT use the transceiver without the
connector cover or the optional device attached�
[P1 (Down)]
The transceiver meets IP67 requirements for dust-
[P2 (Up)]
tight and waterproof protection only when the
connector cover or the optional device is attached�
[Back]

D About the Software key functions

Dealers can assign the Software key functions to the
following keys� See pages 2-7 ~ 2-13 for details�
Speaker
[P1 (Down)], [P2 (Up)], [OK], [Back], [F1], [F2], and
[Emer]
2-2