D Selecting A Ran Channel - Icom IC-F62D Operating Manual

3
BASIC OPERATION
Selecting a channel (Continued)

D Selecting a RAN channel

(Menu > Channel/Scan > RAN CH Select)
1� While in the Digital mode, push [Menu] to display
the "Menu" screen.
2� Push [P2 (Up)] or [P1 (Down)] to select "Channel/
Scan," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "RAN CH
Sel," then push [OK]�
Channel/Scan
RAN CH Sel
RF Power
4� Push [P2 (Up)] or [P1 (Down)] to select a RAN
channel, then push [OK].
RAN CH Sel
✔ 1
2
✔
RAN CH Sel
2
• The selected RAN channel is briefly displayed and set.
5� Hold down [Back] for 1 second to return to the
standby screen�
TIP: While in the Digital mode, push
[Tone/RAN CH Select] to directly display the "RAN
CH Sel" screen in step 4 above�
►
►
►
►
3-6