7
NXDN™ OPERATION
Transmitting a call
D Transmitting a Call Alert call
A Call Alert call enables you to notify another user
who may be away from the transceiver that you want
to talk�
(Menu > Signaling/Call > Call Menu)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Call
Menu," then push [OK]�
Signaling/Call
Call List Select
Call Menu
4� Push [P2 (Up)] or [P1 (Down)] to select the
Individual or Group ID, then push [OK]�
Call Menu
✔ Station 1
Group 1
✔
5� Push [P2 (Up)] or [P1 (Down)] to select "Call
Alert," then push [PTT] to transmit the Call Alert
call�
Station 1
✔ Write Message
Call Alert
✔
• "Success" is displayed when an acknowledgment is
received from the targeted station�
• "Failed" is displayed if an acknowledgment is not
received from the targeted station�
TIP: Hold down [Call Alert] for 1 second to transmit
a Call Alert call�
►
►
►
►
►
►
►
D Transmitting a Remote Monitor call
Remote Monitor call enables you to send a signal that
requires the target station to transmit its microphone
audio�
(Menu > Signaling/Call > Call Menu)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Call
Menu," then push [OK]�
Signaling/Call
Call List Select
Call Menu
4� Push [P2 (Up)] or [P1 (Down)] to select the
Individual ID, then push [OK]�
Call Menu
✔ Station 1
Group 1
✔
5� Push [P2 (Up)] or [P1 (Down)] to select "Remote
Monitor," then push [PTT] to transmit the Remote
Monitor call�
Station 1
✔ Call Alert
Remote Monitor
✔
• "Success" is displayed when an acknowledgment is
received from the targeted station� The microphone
audio can be heard for the preset period of time�
• "Failed" is displayed if an acknowledgment is not
received from the targeted station�
7-8
►
►
►
►
►
►
Need help?
Do you have a question about the IC-F62D and is the answer not in the manual?
Questions and answers