Transmitting A Call; D Transmitting A Ptt Id Call; D Transmitting An Mdc Emergency Call; D Transmitting An Mdc Emergency Acknowledgment - Icom IC-F62D Operating Manual

8
MDC 1200 SYSTEM OPERATION

Transmitting a call

D Transmitting a PTT ID call

You can transmit a call with your station ID�
When another station receives a PTT ID call, your
station ID is displayed�
Push [PTT] to make a call�
• Beeps sound, depending on the presetting�
• Your station ID is transmitted when you push [PTT] (at the
beginning of the transmission) or release [PTT] (at the end
of transmission), depending on the presetting�

D Transmitting an MDC Emergency call

An MDC Emergency call can be transmitted in the
same way as the 2-Tone, 5-Tone, or NXDN
operation� See "Emergency call" for details� (pp� 4-3 ~
4-6)
The transceiver can also be set to keep the
microphone open in the Emergency mode to monitor
the situation, depending on the presetting�
D Transmitting an MDC Emergency
Acknowledgment
When receiving an MDC Emergency call, an MDC
Emergency Acknowledgment is automatically
transmitted, depending on the presetting�
TM signaling
8-3