D Sending A Call To A Destination - Icom IC-F62D Operating Manual

3
BASIC OPERATION
Receiving and transmitting (Continued)

D Sending a call to a destination

When a tone frequency (2-Tone) or code (5-Tone)
is preset in the Call List, a user can select it as a
destination�
(Menu > Signaling/Call > Call List Select)
1� Push [Menu] to display the Menu screen.
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Call List
Select," then push [OK]�
Signaling/Call
Call List Select
Call Menu
4� Push [P2 (Up)] or [P1 (Down)] to select a
destination, then push [OK]�
Call List Select
✔ Station 1
Group 1
✔
Call List Select
Group 1
• The selected destination is briefly displayed and set.
5� Hold down [Back] for 1 second to return to the
standby screen�
►
►
►
►
3-9