Selecting A Channel; D Selecting An Operating Channel; D Selecting The Priority A Or B Channel - Icom IC-F62D Operating Manual

3
BASIC OPERATION

Selecting a channel

D Selecting an operating channel

<Key or Rotary Encoder operation>
z Rotate [Rotary Encoder]�
z Push [CH Up] or [CH Down]�
<Voting operation>
The transceiver automatically starts scanning when a
Zone specified for the Voting operation is selected.
The Voting scan detects the signal strength of the
repeaters, and automatically selects the strongest
one�
<Automatic Scan operation>
Depending on the presetting, when the user turns ON
the transceiver, a scan automatically starts. The scan
stops when a call is received�

D Selecting the Priority A or B channel

<Key operation>
Push [Prio-A] or [Prio-B] to select the Priority A or
Priority B channel�
<Menu operation>
(Menu > Channel/Scan > Priority A CH)
(Menu > Channel/Scan > Priority B CH)
1� Push [Menu] to display the "Menu" screen.
2� Push [P2 (Up)] or [P1 (Down)] to select "Channel/
Scan," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Priority A
CH" or "Priority B CH," then push [OK]�
Channel/Scan
Priority A CH
Prio A (RW)
�
4� After a dialog is displayed, as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
dialog and push [OK]�
R Are u Sure?
OK
Priority A CH
• "Priority A CH" is briefly displayed and is selected as
an operating channel�
5� Hold down [Back] for 1 second to return to the
standby screen�
3-4
►
►
►
►
Cancel