D Deleting The Incoming List - Icom IC-F62D Operating Manual

9
BIIS 1200 SYSTEM OPERATION
Incoming list

D Deleting the Incoming list

The receive call log can be deleted from the Incoming
list�
(Menu > Signaling/Call > Clear Incoming)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Clear
Incoming," then push [OK]�
Signaling/Call
Call Menu
Clear Incoming
4� Push [P2 (Up)] or [P1 (Down)] to select "Voice" or
"Message/Status" to be deleted, then push [OK]�
Clear Incoming
Voice
Message/Status
• Voice:
• Message/Status: The received Status Message
5� After a dialog is displayed as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
screen and push [OK]�
R Are u Sure?
OK
• The selected call log is deleted from the Incoming list�
6� Hold down [Back] for 1 second to return to the
standby screen�
►
►
►
►
►
►
The received Individual or
Group call entries are saved in
the entries�
and Message entries are
saved in the entries�
Cancel
9-10