Table of Contents
Advertisement
1
PANEL DESCRIPTION
■ Front, top, and side panels
1
2
3
4
1 PTT SWITCH [PTT]
Hold down to transmit, release to receive.
L For only the ID-50E
Push briefly and release, and then hold down to transmit a 1750 Hz tone burst.
2 SQUELCH KEY [SQL] (p. 12)
z While holding down, rotate [DIAL] to adjust the squelch level.
z Hold down to temporarily open the squelch and monitor the operating frequency.
3 POWER KEY [ ]
z Hold down for 1 second to turn the transceiver ON or OFF. (p. 7)
z When "Screen Capture [PWR] Key" is set to "ON," push to capture the transceiver
display onto a microSD card. ([MENU] > SET > Function > Screen Capture [PWR] Key)
4 microSD CARD SLOT [microSD]
Insert a microSD card (User supplied). (p. 7)
5 ANTENNA CONNECTOR
Connect the supplied antenna.
6 TX/RX INDICATOR
Lights red while transmitting.
Lights green while receiving a signal, or when the squelch is open.
7 RX CALL SIGN DISPLAY • D-PAD (LEFT) KEY [CD]/D-pad()
z In the DV mode, hold down for 1 second to open the received call history. (p. 51)
z In the MENU screen, push to select an upper-tier menu. (p. 21)
8 MENU • LOCK KEY [MENU]/[
z Push to open the MENU screen. (p. 21)
z Hold down for 1 second to turn the Lock function ON or OFF. (p. 20)
9 MODE • SCAN KEY [MODE]/[SCAN]
z Push to select the operating mode. (p. 15)
z Hold down for 1 second to open the Scan Type Select window. (p. 17)
1
5
6
Function
Display
(p. 3)
7
8
9
10
11
Speaker
]
19
18
17
16
15
14
13
12
Internal
Microphone
20
21
22
Advertisement
Table of Contents
