D Directly Entering Message - Icom IC-F62D Operating Manual

7
NXDN™ OPERATION
Transmitting a call

D Directly entering message

You can directly enter a message, then send it to the
target station or group�
(Menu > Signaling/Call > Write Message)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Write
Message," then push [OK]�
Signaling/Call
Status
Write Message
4� Enter a message of up to 100 characters�
Write Message
Information
L
• To enter the character, rotate [Rotary Encoder] and
push [P2 (Up)]�
Usable characters: a ~ z, A ~ Z, 0 ~ 9,
• To move the cursor, push [P2 (Up)] or [P1 (Down)]�
• To insert a space, push [P2 (Up)] twice�
• To delete, push [Back]�
5� After entering, push [PTT] to send it�
Write Message
Go to Area 2
• "Success" is displayed when an acknowledgment is
received from the targeted station�
• "Failed" is displayed if an acknowledgment is not
received from the targeted station�
►
►
►
►
/ + – = \ . ! ? ʼ , * # "
TIP:
• The entered message can be temporary saved�
After entering a Message in step 5, push [OK] to
display "Save Msg?�" Push [P2 (Up)] or
[P1 (Down)] to select "Yes," then push [OK] to
save� However, once the transceiver is turned
OFF, the saved message is deleted�
Yes
• Push [Write Message] to directly display the "Write
Message" screen in step 4 to the left�
7-7
R Save Msg?
No