Icom IC-F62D Operating Manual page 103

10
VOICE RECORDER FUNCTIONS
Recording a communication audio
This transceiver is equipped with a recorder not only
for the receive audio, but also for transmit audio�
This function is useful to make a communication
record�
NOTE:
• The recording will continue until you turn OFF the
function, or there is no more free space on the
transceiver recording memory�
• When the recording time exceeds 8 minutes, the
transceiver continues to record, but it records to a
new file.
(Menu > Voice Rec > Call Recorder)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select
"Voice Rec," then push [OK]�
Menu
GPS
Voice Rec
3� Push [P2 (Up)] or [P1 (Down)] to select "Call
Recorder," then push [OK]�
Voice Rec
Call Recorder
Play Call Rec
4� Push [P2 (Up)] or [P1 (Down)] to select "ON," then
push [OK]�
Call Recorder
✔ OFF
ON
✔
Call Recorder
ON
• The Call Record function is turned ON�
• Automatically returns to the standby screen�
• " " is displayed�
5� Push [PTT] to start recording both RX and TX
communication audio�
• " " blinks while recording�
• Records when the mute is released�
►
►
►
►
6� Do steps 1 ~ 3 to display the "Call Recorder"
screen�
7� Push [P2 (Up)] or [P1 (Down)] to select "OFF,"
then push [OK]�
Call Recorder
OFF
✔
✔ ON
Call Recorder
OFF
• The Call Record function is turned OFF�
• Automatically returns to the standby screen�
• " " disappears�
TIP: Push [Call Recorder] to turn the Call Record
function ON or OFF�
10-2