D Receiving An Mdc Stun, Kill, Or; Revive Call; D Receiving An Mdc Status Call; D Receiving An Mdc Message Call - Icom IC-F62D Operating Manual

8
MDC 1200 SYSTEM OPERATION
Receiving a call

D Receiving an MDC Stun, Kill, or

Revive call

If an MDC Stun or Kill call is received that matches
your station ID, the transceiver displays "Deactivated"
and you can not receive* or transmit�
Deactivated
To use the transceiver again, you need to:
• Receive* an MDC Revive call that matches your
station ID�
• Enter the password�
• Setup again using the CS-F52D
�
software
*
Depending on the presetting, reception may be enabled�

D Receiving an MDC Status call

When an MDC Status call is received�
• Beeps sound�
• The calling stationʼs ID and the Status message are
displayed once�
ID 1
Call Scan
Status 1
Call Scan
programming
8-9

D Receiving an MDC Message call

When an MDC Message call is received�
• Beeps sound�
• The calling stationʼs ID and the Message are
alternately displayed�
MSG 1
Call Scan
ID 1
Call Scan
L To return to the Standby screen, push [PTT], or
change the channel�