Icom IC-F62D Operating Manual page 36

4
ADVANCED OPERATION
Emergency call
D Transmitting an Emergency call (Continued)
The transceiver enters the Emergency mode through
the following functions:
• The Stationary Detection function
When the transceiver is detected as being stationary
(no motion) for the ON Timer preset time�
L If a user moves the transceiver during the
Reminder Timer set time, the Emergency mode is
canceled�
Enters the
Emergency mode.
ON Timer Reminder Timer
No motion is
detected.
Sends an
Emergency call.
Emergency Timer
Stationary
Sensitivity
Time
If moving during the Reminder
Timer, the Emergency mode
is canceled.
• The Motion Detection function
When the transceiver continuously moves for the ON
Timer preset time�
L If a user holds down [Emergency] for the Emer SW
OFF Timer set time, before the Reminder Timer set
time expires, the Emergency mode is canceled�
Enters the
Emergency mode.
ON Timer
Motion is
detected.
4-6
Sends an
Emergency call.
Reminder Timer Emergency Timer
[Emergency]
Time
If holding down [Emergency]
during Reminder Timer, the
Emergency mode is
canceled.
Motion
Sensitivity