Outgoing List; D Displaying The Outgoing List; D Deleting The Outgoing List - Icom IC-F62D Operating Manual

7
NXDN™ OPERATION

Outgoing list

The transceiver saves a log of the transmitted
Individual calls and Call Alert calls in the memory,
depending on the presetting�
Up to 5 calls can be saved in the log, and the oldest
call record is deleted when a 6th call is received�
However, once the transceiver is turned OFF, the all
records are deleted�

D Displaying the Outgoing list

(Menu > Signaling/Call > Outgoing)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select
"Outgoing," then push [OK]�
Signaling/Call
Message
Outgoing
• The calling station name (or ID) is displayed in the
"Outgoing" screen�
Outgoing
Station 1
Station 3
L " " is for Individual calls�
L " " is for Call Alert calls�
4� Hold down [Back] for 1 second to return to the
standby screen�
►
►
►
►

D Deleting the Outgoing list

The transmit call log can be deleted from the Outgoing
list�
(Menu > Signaling/Call > Clear Outgoing)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select "Signaling/
Call," then push [OK]�
Menu
Channel/Scan
Signaling/Call
3� Push [P2 (Up)] or [P1 (Down)] to select "Clear
Outgoing," then push [OK]�
Signaling/Call
Clear Incoming
Clear Outgoing
4� After a dialog is displayed as shown below, push
[P2 (Up)] or [P1 (Down)] to select <OK> on the
screen and push [OK]�
R Are u Sure?
OK
• The selected call log is deleted from the Outgoing list�
5� Hold down [Back] for 1 second to return to the
standby screen�
7-19
►
►
►
►
Cancel