Receiving A Call; D Receiving An Individual Call; D Receiving A Group Call; D Receiving A Status Message - Icom IC-F62D Operating Manual

7
NXDN™ OPERATION

Receiving a call

D Receiving an Individual call

When an Individual call is received:
• Mute is released�
• The Status indicator lights green�
• The calling station name (or ID) is displayed while
receiving the signal�
Station 10
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�

D Receiving a Group call

When a Group call is received:
• Mute is released�
• The Status indicator lights green�
• The Group name and the calling station name (or ID)
are alternately displayed while receiving the signal�
L When an All Call is received, "All Call" is displayed� In
that case, you cannot reply to it�
Group C
Call Scan
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�

D Receiving a Status message

When a Status message is received:
• Beeps sound�
• The Status message and the calling station or Group
name (or ID) are alternately displayed�
• " " blinks.*
• " " may be displayed or blink, depending on the
presetting.*
• May vibrate, depending on the presetting�
RX Status 01
Call Scan
Push [Back] to stop the display indication�

D Receiving a Message

When a Message is received:
• Beeps sound�
• The Message and the calling station or Group name
(or ID) are alternately displayed�
• " " blinks.*
• " " may be displayed or blink, depending on the
presetting�
• May vibrate, depending on the presetting�
Go to Area 1
Call
Push [Back] to stop the display indication�

D Receiving a Call Alert call

When a Call Alert call is received:
• Beeps sound�
• "Call Alert" and the calling station or Group name (or
ID) are alternately displayed�
• " " may be displayed or blink, depending on the
presetting�
• May vibrate, depending on the presetting�
Call Alert
Call
1� Hold down [PTT] to speak�
2� Release [PTT] to receive�

D Receiving a Radio Check call

When a Radio check command is received,
the transceiver automatically transmits an
acknowledgment call� The RAN code matching may
not be necessary, depending on the presetting�

D Receiving a Remote Monitor call

When a Remote monitor call is received, the
microphone audio is automatically transmitted for the
set time period� The RAN code matching may not be
necessary, depending on the presetting�
7-12
Scan
Scan