Miscellaneous Function M? Enter M2 To End The Program And Confirm With The End Key: The Tnc; Saves The Entered Positioning Block - HEIDENHAIN iTNC 530 User Manual

Nc software 606420-04 sp8 606421-04 sp8 606424-04 sp8 606425-04 sp8

Hide thumbs Also See for iTNC 530:

Table of Contents

Call the menu for special functions

Display the functions for point machining

Select the pattern definition

Select point entry: Enter the coordinates of the 4

points and confirm each with the ENT key. After

entering the fourth point, save the block with the END

Display the menu for defining the cycle call

Run the drilling cycle on the defined pattern:

Confirm Feed rate F=? with the ENT key: Move at

rapid traverse (FMAX)

Miscellaneous function M? Switch on the spindle and

coolant, e.g. M13. Confirm with the END key: The TNC

Retract the tool: Press the orange axis key Z in order

to get clear in the tool axis, and enter the value for the

position to be approached, e.g. 250. Confirm with the

Confirm Radius comp.: RL/RR/no comp? by pressing

the ENT key: Do not activate the radius compensation

Confirm Feed rate F=? with the ENT key: Move at

rapid traverse (FMAX)

Miscellaneous function M? Enter M2 to end the

program and confirm with the END key: The TNC

saves the entered positioning block

First Steps with the iTNC 530

Show Quick Links

Chapters

Table of Contents