Cycle Parameters; Logging Function - HEIDENHAIN TNC 620 User Manual

17
Touch Probe Cycles: Automatic Kinematics Measurement
17.3 SAVE KINEMATICS (Cycle 450, DIN/ISO: G450, option)

Cycle parameters

Mode (0/1/2/3) Q410: Define if you wish to backup
or restore the kinematics:
0: Backup active kinematics
1: Restore saved kinematics
2: Display current memory status
3: Delete a data record
Memory designation Q409/QS409: Number or
name of the data block designator. For a number,
enter a value from 0 to 99999; for a name, enter a
maximum of 16 characters. 16 memory spaces in
total are available. Q409 has no function if Mode
2 has been selected. Wildcards can be used for
searching in Modes 1 and 3 (Restore and Delete). If
the TNC finds several possible data blocks because
of the wildcards, it restores the mean values of
the data (Mode 1) or deletes all selected data
blocks after confirmation (Mode 3). You can use the
following wildcards in a search:
?: A single indefinite character
$: A single alphabetic character (letter)
#: A single indefinite number
*: An indefinite character string of any length

Logging function

After running Cycle 450, the TNC will create a measuring log
(TCHPRAUTO.HTML) containing the following information:
Creation date and time of the log
Name of the NC program from which the cycle was run
Designator of the current kinematics
Active tool
The other data in the log vary depending on the selected mode:
Mode 0: Logging of all axis entries and transformation entries of
the kinematics chain that the TNC has saved.
Mode 1: Logging of all transformation entries before and after
restoring the kinematics configuration.
Mode 2: List of the saved data records.
Mode 3: List of the deleted data records.
448
Saving the current kinematics
5 TCH PROBE 450 SAVE KINEMATICS
Restoring data blocks
5 TCH PROBE 450 SAVE KINEMATICS
Displaying all saved data blocks
5 TCH PROBE 450 SAVE KINEMATICS
Deleting data blocks
5 TCH PROBE 450 SAVE KINEMATICS
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 9/2015
Q410=0 ;MODE
Q409=947 ;MEMORY DESIGNATION
Q410=1 ;MODE
Q409=948 ;MEMORY DESIGNATION
Q410=2 ;MODE
Q409=949 ;MEMORY DESIGNATION
Q410=3 ;MODE
Q409=950 ;MEMORY DESIGNATION