O 2 Sensor Information; Viewing Software Information - Dräger caleo Instructions For Use Manual

*
O sensor information
2
The screen displays the following information for the
O sensors used:
2
– Date of manufacture
– Date of last calibration
– Date of next calibration.

Viewing software information

– The software version and the number of operating hours
are displayed on the screen. Where applicable, this screen
contains additional information on service intervals. Further
information on this subject is provided in the service
documentation.
1 Return to configuration parameter menu = press soft key
button
or
2 Press the rotary knob.
– The display returns to the configuration parameter menu
(see page 80).
* optional equipment feature
D
1
Operation
Configuration
2
85