Download Print this page

Advertisement

Quick Links

1. Disinfecting/ Cleaning/ Sterilzing
a) done after each patient change
b) see Operator's Manual for list of approved cleaning disinfectants
2. Check air filter.... Tilt unit for easy access:
3. View of filter area:
Part number MX 17 015
4. Place Caleo in horizontal position using tilt controls:
Cleaning the Caleo Incubator

Advertisement

loading

Summary of Contents for Dräger Caleo

  • Page 1 Operator’s Manual for list of approved cleaning disinfectants 2. Check air filter…. Tilt unit for easy access: 3. View of filter area: Part number MX 17 015 4. Place Caleo in horizontal position using tilt controls:...
  • Page 2 5. Select Cleaning Mode from the Menu and start the Cleaning Mode. 6. ALLOW CALEO TO COOL DOWN after self cleaning (one hour) 7. Remove canopy… Grasp the handles on the sides of the canopy with both hands. Lifting the canopy horizontally 8.
  • Page 3 10. Open all flaps same way. Remove any and all visible soiling, using approved disinfectant. 11. Remove all grommets: 12. Clean the grommets with a disinfecting solution. 13. Remove the mattress from inside the incubator: 14. Wipe mattress down with approved cleaner and check for holes or punctures in material.
  • Page 4 16. Remove XRAY tray….using recessed handle. Pull out XRAY tray as far as it will go. Then tilt the drawer upwards and pull out completely:...
  • Page 5 17. Wipe down all surfaces with approved disinfectant 18. The remaining tray is also removed: 19. Remove that remaining piece by pressing the two catches inwards and lifting up at the same time:...
  • Page 6 20. Wipe down surfaces 21. The impeller is now in plain view , remove ( PLEASE note: maybe HOT!) 22. Remove any soiling and wipe down with approved cleaning material 23. After drying replace impeller. 24. Turn over trough ( part removed to expose fan impeller) 25.
  • Page 7 26. Base Frame and body. Remove any visible soiling with cloth and detergent approved for use on Caleo. 27. Control Panel 28. Wipe –disinfect the surfaces then wipe clean with DAMP cloth and rub dry 29. DO NOT ALLOW MOISTURE TO ENTER THE CONTROL PANEL. DO NOT...