Dräger caleo Instructions For Use Manual page 21

Side flap
The side flap is opened and closed in the same way as the
l
front flap (see page 20).
*
Double wall
The double wall (2M 51 150) can only be fastened to the
canopy (2M 51 108).
Fitting the double wall
1 Pull the plunger up as far as it will go.
The red shaft will then be visible.
Place the double wall on the hood.
l
2 Position the centering lugs in the recesses in the hood.
3 Place the bore sleeve of the double wall assembly in the
hole for the "feeding grommet" plug.
Lay the contour seal (gasket) of the double wall evenly on
l
the hood.
Securing the double wall
4 Push the plunger down into the sleeve until it engages.
The red shaft of the plunger must no longer be visible.
* optional equipment feature
Doors, ports and bed
1
2
3
2
4
Preparation
21