Table of Contents
Advertisement
Preparation
The following description refers to the assembly of the
equipment. the connection of the hoses, as welt as the
calibration of the integrated monitors. These actions must
be followed by a test of readiness for operation, page 92.
Fitting patient system
.
Push patient system into mounting as far as it will go.
Make sure that it is engaged by gently pulling the port.
Fitting flow sensor
1
Push socket to the left as far as it will go.
Place flow sensor - with plug towards the equipmeit
-into
the mounting and push into the socket as far as
it will go.
Then:
push to the right into the rubber lip on the patient
system as far as it will go.
Advertisement
Table of Contents
