Dräger caleo Instructions For Use Manual page 15

Mounting the control unit on the handle side
Only technically qualified personnel may move the control
unit from the wall side to handle side or vice versa.
Fit the basic pole (2M 50 680), see page 16.
l
Screw in the extension pole 38/600 (2M 50 691) or
l
pole 38/310 (2M 50 688).
Refit the control unit as specified in the Assembly
l
Instructions.
The cable to the control unit must not be removed from
l
the cable guides on the basic pole.
Make sure there is sufficient space to swivel and tilt
l
the unit.
Infusion support (2M 21 514)
for pole, 38 mm
Max. load per hook 3 kg
Push the fixing claw onto the pole.
l
Push the infusion holder into the fixing and secure it firmly
l
with the clamping screw.
Swivel table (2M 21 186)
for pole, 38 mm
For small parts, max. load 3 kg
Place the clamp of the swivel table on the stand pillar and
l
tighten the clamping screw.
Make sure that the swivel zone remains clear.
Preparation
Mounting accessories
15