Dräger caleo Instructions For Use Manual page 53

– The actual measured value and the set value are displayed
on the screen both as bar graphs and as numerical values.
– The following message is displayed in the top part of the
screen »set value with rotary knob«.
1 Increase the set value = turn the rotary knob clockwise.
1 Decrease the set value = turn the rotary knob counter-
clockwise.
1 Confirm the new setting = press the rotary knob.
If you do not wish to change the settings:
press = the new settings are cancelled.
The display returns to the standard screen. The previous set
value is retained.
Or
– Wait for 7 seconds: Caleo
the user to press the rotary knob. The display returns
immediately to the standard screen. The previous set value
is retained.
When using the extended set value range, the the
baby's core temperature must be specially monitored.
If the specified set value exceeds the standard set value range,
– The following message is displayed
»confirm extended range with rotary knob«.
1 Confirm the extended range = press the rotary knob.
1 Continue increasing the set value = turn the rotary knob
clockwise.
®
emits 4 short beeps to prompt
Using skin temperature control
D
Operation
1
53