Router Interface Commands - Alcatel-Lucent 7210 SAS M Configuration Manual

Router Interface Commands

config
7210 SAS M, X Router Configuration Guide
— router [router-name]
— [no] interface
— accounting-policy policy-id
— no accounting-policy
— address
ones}]
— no address
— [no]
— arp-timeout
— no arp-timeout
— bfd transmit-interval [receive receive-interval] [multiplier multiplier] [echo-
receive echo-interval
— no bfd
— description
— no description
— egress
— icmp
— ingress
— ldp-sync-timer
— no ldp-sync-timer
— [no]
— [no]
— mac
— no mac
— [no]
— port
— no port
— [no]
— [no]
— [no]
— static-arp
— no static-arp
— tos-marking-state
— no tos-marking-state
ip-int-name
{ip-address/mask | ip-address netmask} [broadcast {all-ones | host-
allow-directed-broadcasts
seconds
description-string
— filter ip ip-filter-id
— no filter
— [no] mask-reply
— redirects [number seconds]
— no redirects
— ttl-expired [number seconds]
— no ttl-expired
— unreachables [number seconds]
— no unreachables
— filter ip ip-filter-id
— no filter
— [no] filter
seconds
local-proxy-arp
loopback
ieee-mac-addr
ntp-broadcast
port-name
proxy-arp-policy policy-name [policy-name...(upto 5 max)]
remote-proxy-arp
shutdown
ip-address ieee-address
ip-address
{trusted | untrusted}
IP Router Configuration
Page 41