Router Advertisement - Alcatel-Lucent 7450 Configuration Manual

Configuring Interfaces

Router Advertisement

To configure the router to originate router advertisement messages on an interface, the interface
must be configured under the router-advertisement context and be enabled (no shutdown). All
other router advertisement configuration parameters are optional.
Router advertisement can be configured under the
context or under the
following example CLI syntax to enable router advertisement and configure router advertisement
parameters:
CLI Syntax: config>router# router-advertisement
The following displays a router advertisement configuration example.
*A:sim131>config>router>router-advert# info
----------------------------------------------
----------------------------------------------
*A:sim131>config>router>router-advert# interface n1
*A:sim131>config>router>router-advert>if# prefix 2001:db8:3::/64
Page 82
config>service>vprn>router-advertisement
dns-options
dns-servers ipv6-address
rdnss-lifetime seconds
interface ip-int-name
current-hop-limit number
dns-options
dns-servers ipv6-address
rdnss-lifetime {seconds | infinite}
include-dns
managed-configuration
max-advertisement-interval seconds
min-advertisement-interval seconds
mtu mtu-bytes
other-stateful-configuration
autonomous
on-link
preferred-lifetime {seconds | infinite}
valid-lifetime {seconds | infinite}
reachable-time milli-seconds
retransmit-time milli-seconds
router-lifetime seconds
no shutdown
use-virtual-mac
interface "n1"
prefix 2001:db8:3::/64
exit
use-virtual-mac
no shutdown
exit
config>router>router-advertisement
7450 ESS Router Configuration Guide
context Use the
.