Check Panel - Bentel Security KYO 320 Installation Manual

Check Panel

The Check op tion from the menu bar of KYO320 down -
loading soft ware ap pli ca tion
tions: Check Panel and Check Con fig u ra tion.
Check Panel This op tion will al low you to view the
real-time sta tus of the Con trol panel (see Fig. 55).
En try of a valid User code PIN will al low you to con trol
the Zones, Out puts and Par ti tions and view the Tim ers
and Trou ble win dows.
To op er ate on a spe cific Par ti tion: click on the Par ti -
tion con cerned then right-click to open a menu (see Fig.
55) which will al low you to:
D: Dis arm; A: Arm Away mode; S: Arm Stay Mode; I: In -
stant (Arm Stay 0 De lay Mode) or Re set the Par ti tion
con cerned and Con trol panel.
To op er ate on a ALL Par ti tions: right-click on the Par ti -
tion sec tion to open a menu which will al low you to:
D: Dis arm ALL Par ti tions; A: Arm ALL Par ti tions in Away
mode; S: Arm ALL Par ti tions in Stay mode; I: Arm ALL
Par ti tions in In stant mode (Stay 0 De lay) or Re set ALL
Par ti tions and Con trol panel.
To op er ate on a spe cific Zone:
right click on the Par ti tion the
Zone be longs to, then right-click
to open a menu which will al low
you to: By pass; Unbypass or
view the real-time an a logue
value of the Zone. To con trol an
Out put: right-click on the Out put con -
cerned to open a menu which will al -
low you to turn the Out put ON or
OFF.
About the func tion but tons (un der User PIN field).
Click ing on the first but ton will open a menu
which will al low you to dis able dis play of
real-time sta tus data (en abled at de fault) re -
gard ing the Zones, Par ti tions, Trou ble, Out puts
and Tim ers.
Click ing on the sec ond
menu with the fol low ing op tions: Show vi o lated
zones only; Au di ble sig nal ling (Beep); Clear
man u ally.
Click ing on the third but ton will al low you to en -
able "Test" mode on ALL Zones.
Click ing on the fourth but ton will al low you to
dis able "Test" mode on ALL Zones.
Click ing on the fifth but ton will al low you to Re -
set "Pro gram ming from PC" Trou ble.
Click ing on the sixth but ton will close the win -
dow.
KYO320
pro vides two sub-op -
Fig ure 55 Check panel Win dow
but ton will open a
Fig ure 56 Check Con fig u ra tion Win dow
PRO GRAM MING FROM THE PC
Check Configuration This op tion will al low you to
view the sta tus of the Con trol panel pe riph er als in ei ther
Test mode or Graphic mode (see Fig.56).
Graphic mode: The real-time sta tus of each pe riph eral
will be in di cated by the col our of its icon, as fol lows:
Green: the pe riph eral con cerned is in the con fig u ra -
tion and op er at ing prop erly.
Red: the pe riph eral con cerned is in the con fig u ra tion
but is in Tam per sta tus (e.g. Frontplate open).
Yel low: the pe riph eral con cerned is in the con fig u ra -
tion but is miss ing.
Or ange: the pe riph eral con cerned is in the con fig u -
ra tion but has the same ad dress as an other pe riph -
eral of the same type (Du pli cated pe riph eral).
White: the pe riph eral con cerned is not in cluded in
the con fig u ra tion.
In Test mode the real-time sta tus of each pe riph er -
als will be in di cated by the col our of the vir tual LED
lo cated next to it.
87