Type Description; Models; Options - Bentel Security KYO 320 Installation Manual

Expandable multifunction control panel
Hide thumbs Also See for KYO 320:
Table of Contents

Advertisement

Valid for mat: hh.mm — where hh rep re sents the hour
(00 to 23) and mm rep re sents the min utes (00 to 59).
For ex am ple, to set 7:45 a.m. — en ter 07.45. to set 5:45
p.m. en ter 17.45.
If you en ter an in valid value, the ap pli ca tion will dis play
an er ror mes sage.
1st Arm. / 2nd Arm. / 3rd Arm. / 4th Arm. These
fields will al low you to set up the au to matic arm ing times
for the cor re spond ing Par ti tion.
1st Type / 2nd Type / 3rd Type / 4th Type These
fields will al low you to se lect the Arming Mode (Type)
for that Par ti tion:
A = Away
S = Stay
I = Stay with 0 De lay (In stant)

Type Description

The Type Descr. but ton opens a win dow for the Model
la bels (Week day, Half-day, Hol i day, Christ mas hol i day,
Sum mer Hol i day, etc.).
No. This non-editable field shows the Model ID Num ber.
Description This field will al low you to edit the Model
la bel (max i mum 16 char ac ters).

Models

The Models but ton will open the pro gram ming win dow
of the pa ram e ters de scribed in this sec tion.
Day This field will al low you to se lect the Day num ber.
Valid en tries: 1 through 31 or As ter isk *.
If you se lect an as ter isk (*), the Day num ber (1
through 31) will be ir rel e vant for the Model.
If you se lect a Day num ber, you will not be able to se -
lect a Week day.
If you se lect an in valid num ber, the ap pli ca tion will
au to mat i cally rec tify it to last day of the month
concerned, when you click Down load.
Month This field will al low you to se lect the
Month.
If you se lect an as ter isk (*) the Month will
be uninfluential.
Year This field will al low you to se lect the
Year.
Valid en tries: 2005 through 2019:
If you se lect an as ter isk (*) the Year will be
uninfluential.
Interval You must se lect this field, if the cor -
re spond ing line in di cates the Start of an In ter -
val such as: Sum mer hol i days, Bank hol i day
week-end, Christ mas, etc.
To pro gram an In ter val: se lect the start of the
In ter val on one line and the end of the In ter val
72
on the fol low ing line, then click the Start field. If the en -
try is valid the words Start and Stop will be shown.
Valid en tries: 1 through 31 (Day Num ber) or Mon day,
Tues day, etc. (Week day).
The In ter val MUST Start and Stop within the same
month.
Day of Week This field will al low you to se lect the Day.
If you se lect an as ter isk (*), the Day of the week will
be uninfluential.
If you se lect a Week day, you will not be able to spec -
ify the Day Num ber (1 through 31).
Type This field will al low you to se lect the De scrip tion
(la bel) of the Model.
If you do not se lect a De scrip tion, the cor re spond ing
Model will not be saved.
You must se lect the De scrip tion of the Model on the
Start line of the in ter val. You can not se lect the De -
scrip tion on the Stop line as this field is au to matic (*).
Sort Models This but ton will al low you to pri or i tize the
Models.
NOTE: Some days may be long to sev eral Models. If
this oc curs, the Sched uler will ap ply the Times of the
least fre quent Model.
For ex am ple, the Christ mas Hol i day Model is ap plied
once a year, there fore, it will take pri or ity over the
Week day Model that is ap plied 5 days per week.

Options

The Op tions but ton will open the pro gram ming win dow
of the pa ram e ters de scribed in this sec tion.
Max. Overtime Requests This op tion will al low you to
set the max i mum num ber of Over time Re quests.
EX AM PLE: If a Timer con trolled Par ti tion is sched uled
to Arm at 17:45 — and the Over time re quest pe riod is
Fig ure 47 Sched uler - Arming Page

Advertisement

Table of Contents
loading

Table of Contents