Associated Timer; User Menu Access; Father Pin; New Pin - Bentel Security KYO 320 Installation Manual

The check boxes on the sec ond line will al low you to se -
lect the Code Par ti tions.
Box ticked: the Code CAN op er ate on the cor re -
spond ing Par ti tion.
Box empty: the Code CANNOT op er ate on the cor re -
spond ing Par ti tion.
To DIS ABLE the Code on all the Par ti tions: click the
Par ti tions but ton (bot tom of page) then se lect None.
To EN ABLE the Code on all the Par ti tions: click the Par -
ti tions but ton (bot tom of page) then se lect All.
To tog gle the cur rent En abled/Dis abled sta tus of the
Code: click Par ti tions but ton (bot tom of page) then se -
lect In vert se lec tion.
Code com mands will af fect ONLY the Par ti tions
(and sub se quently the Zones) com mon to both the
Code and Key pad in use.
A This line will al low you to se lect the A Mode Arming
con fig u ra tion of the Par ti tions.
Dou ble click on the Par ti tion field un til the re quired
mode is shown (D, N, A, S or I), or right click the Par ti -
tion field then se lect the re quired mode from the
drop-down list.
Arming Modes
D = Par ti tion will Dis arm
N = no op er a tion
A = Par ti tion will Arm in Away mode
S = Par ti tion will Arm in Stay mode
I = Par ti tion will Arm in Stay mode with zero de lay (In -
stant)
B As for A but for B Mode Arm com mands at a Key pad.
C As for A but for C Mode Arm com mands at a Key pad.
D As for A but for D Mode Arm com mands at a Key pad.

Associated Timer

If a Code is as so ci ated with a Timer, it will func tion only
dur ing the pro grammed Timer slots (re fer to
"Sched uler - Timers").

User menu access

This sec tion of the User page will al low you to
limit the num ber of op er a tions a code can per -
form (Arm, Arm Type A, B, c or D, Dis arm and
Ac cess User Menu).
Always If this op tion is en abled, the Code
will be able to per form an UNLIMITED num -
ber of op er a tions.
If this op tion is dis abled, you will be able to
LIMIT the num ber of op er a tions the Code will
be able to per form via the Max. op tion.
78
ONLY Codes with Al ways sta tus can be Fa ther
codes.
You CANNOT dis able the Al ways sta tus of Fa -
ther codes.
A Code that DOES NOT HAVE Al ways sta tus
(Al ways op tion dis abled) can be its own Fa ther
code, in which case, the Al ways at trib ute will be
en abled au to mat i cally.
Max. This field will al low you to pro gram the num ber
op er a tions the Code will be al lowed to per form.
Valid en tries: 1 through 254
The Code op er a tion coun ter will count all the Arm, Arm
Type A, B, c or D, Dis arm and Ac cess User Menu op er -
a tions.
Once the Code reaches the Max. num ber of op er a tions
al lowed, it will be au to mat i cally dis abled. If an at tempt is
made to use a Code that has reached the Max. num ber
of op er a tions (there fore dis abled), the dis play will show
the [code not ac tive] mes sage.
You must change the Code PIN, if you wish to re fresh
the Code op er a tion coun ter.
ALL the Code op er a tion coun ters will be re freshed
au to mat i cally each time the User page is down -
loaded.

Father PIN

A Code's Avail able sta tus, Ac tive sta tus, Fa ther
codes and PIN can not be changed with out en ter ing one
of its pro grammed Fa ther codes.
The Code PIN at de fault is 0 fol lowed by the Code
ID Num ber. Ex am ple: PIN of Code No. 001 is 0001.

New PIN

This pro gram ming field will al low you to change the de -
fault PIN, as fol lows:
en ter the Code's Fa ther Code (to ac ti vate the New
PIN pro gram ming field);
Fig ure 49 Users — Code ac cess page